What happens when the speedport.ip not working

The various speed port models of T-Online are among the routers that are most often installed in American households. Despite the product maturity folds of access do not always work on the equipment. We show typical causes and offer solutions.

Even if you have rare access the Speedport Router. When it comes time it does not work for many different reasons. The problem here is that the number of possible causes is endless.

We have collected the most common causes and offer possible solutions to.

Solution: 192.168.2.1 instead speedport.ip

It happens that browser problems resolving the address input have speedport.ip. As a result, is not routed correctly to the router. You get so by the multiple input is not the goal.

If your browser does not reach the login interface of your port speed when entering speedport.ip in the address bar, try it by entering the IP address to access it.

The port speed has on the local network have the IP address 192.168.2.1. Enter this into the address bar of your browser. In most cases, it will display the user interface of the router.

No access for certificate error

You receive when entering speedport.ip or the IP address a warning in your browser ? You can rest assured. Your browser does not know simply the certificate of the Speedport Router.

As long as you do not accept the certificate, but it is not possible to access the user interface of the router. So let the certificate of the Speedport Router view and confirm it. You should then be able to access easily to the router and go directly to the login.

Firewall and virus programs can interfere

Sometimes it happens that overzealous firewalls and virus software to prevent access to the router. It is difficult to find out whether the programs are among the transgressors. Therefore: If all solutions fail, disable the firewall in the short term as well as the virus scanner and then try to access the port speed.

Failed addresses in the network

This allows you to access the address of the Speedport, you must be in the same "network". Sometimes it happens that the allocation of IP address fails on a PC. Often this happens when multiple PCs are connected to the router.

In such a case, you have two possible solutions. The first is trivial: Restart all devices.

The second version is a bit more complicated. Here you assign your PC a static IP address on the network. For this purpose, you must select the network settings, your Internet connection. Go here to Settings and select under "TCP / IPv4" to assign a fixed IP address.

Give your PC while the IP address of 192.168.2.x - where x should be a number from 2 to 255. In subnet mask, enter 255.255.255.0, default gateway, select 192.168.2.1. This value can also pass the preferred DNS server.

After changing and apply these settings to access the user interface of the port speed should be no problem. Under certain circumstances, the reboot of connected equipment is necessary.

Restart all devices

There may be a technical fault at the port speed as well as to adjoining equipment. This can be ascertained not always readily. If no solution will be successful, try the simple way and turn off all devices (including the port speed) for several minutes.

Make sure that all the devices are actually disconnected from the mains. Wait about 5 minutes until you take all the equipment back into operation and check whether this approach was successful.

Wired connection

In particular WLAN often fails to access the user interface of the port speed, especially if the gateway is allocated incorrectly.

Since you rarely need to access the port speed, this approach is very promising, yet easy to implement. Connect your PC to a LAN cable to the router and disable while the Wi-Fi connection on your PC.

Access to the port speed interface should now be possible at the latest after assigning the IP address.